跪求压力控制阀装配图
作者&投稿：芒注 （若有异议请与网页底部的电邮联系）
汽车机油压力控制阀装哪里的~
GB/T13852-1992
船用液压控制阀技术条件
General specification of hydraulic control valves for ship
GB/T17490-1998
液压控制阀油口、底板、控制装置和电磁铁的标识
Hydraulic fluid power--Identification of valve ports,subplates,control devices and solenoids
GB/T15623.1-2003
液压传动 电调制液压控制阀 第1部分：四通方向流量控制阀试验方法
Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 1:Test methods for four-way directional flow control valves
GB/T15623.2-2003
液压传动 电调制液压控制阀 第2部分：三通方向流量控制阀试验方法
Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 2:Test methods for three-way directional flow control valves
GB/T17213.7-1998
工业过程控制阀第7部分: 控制阀数据单
Industrial-process control valves Part 7: Control valve data sheet
GB/T17213.8-1998
工业过程控制阀第8部分: 噪声的考虑第1节: 实验室内测量空气动力流流径控制阀产生的噪声
Industrial-process control valves Part 8: Noise considerations Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves
GB/T17213.1-1998
工业过程控制阀第1部分: 控制阀术语和总则
Industrial--Process control valves Part 1: Control valve terminology and general considerations
GB/T17213.5-1998
工业过程控制阀第5部分: 标志
Industrial-process control valves Part 5: Marking
GB/T2514-1993
四油口板式液压方向控制阀安装面
Hydraulic fluid power--Four-port directional control valves--Mounting surfaces
GB/T8104-1987
流量控制阀试验方法
Hydraulic fluid power--Valves--Testing method of flow control valves
GB/T7940.3-2001
气动五气口方向控制阀第三部分: 功能识别编码体系
Pneumatic fluid power--Five-port directional control valves--Part 3: Code system for communication of valve functions
GB/T8106-1987
方向控制阀试验方法
Hydraulic fluid power--Valves--Testing method of directional control valves
GB/T7940.2-2001
气动五气口方向控制阀第二部分带电气接头的安装面
Pneumatic fluid power--Five-port directional control valves--Part 2: Mounting interface surfaces with optional elettrical connector
GB/T8105-1987
压力控制阀试验方法
Hydraulic fluid power--Valves--Testing method of pressure control valves
GB/T7940.1-2001
气动五气口方向控制阀第一部分: 不带电气接头的安装面
Pneumatic fluid power--Five-port directional control valves--Part 1: Mounting interface surfaces without electrical connector
GB/T8100-1987
板式联接液压压力控制阀(不包括溢流阀)顺序阀、卸荷阀、节流阀和单向阀安装面
Hydraulic fluid power--Pressure control valves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves--Mounting surfaces
GB/T8098-2003
液压传动带补偿的流量控制阀安装面
Hydraulic fluid power--Compensated flow control valves--Mounting surfaces
JB/T7387-1994(2005复审)
工业过程控制系统用电动控制阀
NF C46-520-1993
工业过程控制阀.第8部分:噪声问题.第2节:通过控制阀的液压流动产生的噪声的实验室测量
(Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.)
NF C46-522-1994
工业处理控制阀.第8部分:噪声条款.第4节:液压流动产生的噪声预定(EN 534-8-4)
(Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.)
NF E49-080-1-2002
气压液动.五通定向控制阀.第1部分:不带电连接器的安装接口
(Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.)
NF E49-080-2-2002
气压液动.五通方向控制阀.第2部分:任选电气连接器的安装接口面
(Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.)
NF C46-505-1998
绝缘过程控制阀.第2-3部分:流量容量.试验过程
(Industrial-process control valves. Part 2-3 : flow capacity. Test procedures.)
NF C46-630-1998
工业过程控制阀.第6部分:控制阀与定位器连接用安装细节.第1节:线性传动装置上安装的定位器
(Industrial-process control valves. Part 6 : mounting details for attachment of positioners to control valves. Section 1 : positioner mounting on linear actuators.)
NF E29-453-2000
工业过程控制阀门
(Industrial process control valves.)
NF E29-316-5-2001
供水用阀门.适用性要求和专用检查试验.第5部分:控制阀门
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves.)
NF C46-521-2001
工业过程控制阀.第8部分:噪声问题.第3节:气动控制阀噪声预测法
(Industrial-process control valves - Part 8-3 : noise considerations - Control valves aerodynamic noise prediction method.)
NF E48-435-1998
液压传动.尺寸02、03和05的四端口模式排气阀和四端口方向控制阀.夹紧尺寸
(Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions.)
NF C46-519-2001
工业过程控制阀.第8部分:噪声考虑.第1节:实验室测量气动流经控制阀产生的噪声
(Industrial-process control valves - Part 8 : noise considerations - Section 1 : laboratory measurement of noise generated by aerodynamic flow through control valves.)
NF C46-531-2001
工业过程控制阀.第6-2部分:定位器装到控制阀的安装细则.旋转传动装置上安装的定位器
(Industrial-process control valves - Part 6-2 : mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators.)
NF E49-091-2002
气压传动.控制阀和其它部件的孔口和控制机械的验证
(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components.)
XP E29-140-1999
使用气体燃料的家用装置的控制阀.安全控制阀(带有集中自动密闭器的)
(Control cocks for household appliances using gaseous fuels - Safety cocks (with integrated automatic obturator).)
NF C46-510-2001
工业过程控制阀.第3-1部分:尺寸.双通球型直立式控制法兰阀门的面对面尺寸和双通球型角度控制法兰阀门的中心
(Industrial-process control valves - Part 3-1 : dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, a)
NF C46-511-2001
工业过程控制阀.第3-2部分:尺寸.蝶阀除外的旋转控制阀门的面对面尺寸
(Industrial-process control valves - Part 3-2 : dimensions - Face-to-face dimensions for rotary control valves except butterfly valves.)
NF E49-090-2-2003
气压传动.18mm和26mm五气口方向控制阀.第2部分:带光学电接头的安装面
(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2 : mounting interfaces with optional electrical connector.)
NF C46-512-1999
工业处理控制阀.第3-3部分:尺寸.对焊接的头尾相接尺寸.两接头球型直接式控制阀(欧洲标准EN 60534-3-3)
(Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.)
ANSI/IEEE 1290-1996
核发电站电动控制阀门马达应用、防护、控制和试验指南
(Guide for MOV (Motor-Operated Valve) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations)
ANSI/FCI 87-2-1990
弹簧模板驱动控制阀动力信号标准
(Power Signal Standard for Spring-Diaphragm Actuated Control Valves)
ANSI/ISA 75.08.02-2003
无凸缘的控制阀端面间的尺寸(级别150、300和600)
(Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600) )
ANSI/ISA S 75.08.03-2001
承插焊接端头和螺旋端头球状控制阀的面到面尺寸
(Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500))
ANSI/ISA 75.08.06-2002
带凸缘的球型控制阀体的面对面尺寸(类型900、1500和2500)
(Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) )
ANSI/ISA 75.08.05-2002
端头对焊球型控制阀的面对面尺寸(类型150、300、600、900、1500和2500)
(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) )
ANSI/ISA 75.01.01-2002
尺寸控制阀用流量方程式
(Flow Equations for Sizing Control Valves )
ANSI/ISA 75.08.01-2002
整体式带凸缘的球型控制阀体的面对面尺寸(类型125、150、250、300和600)
(Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) )
ANSI/ISA S 75.19.01-2001
控制阀的静水试验
(Hydrostatic Testing of Control Valves)
ANSI/ISA S 75.08.04-2001
对焊端头球状控制阀的面到面尺寸
(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves)
ANSI/ISA S 75.08.07-2001
独立法兰球状控制阀的面到面尺寸
(Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600))
ANSI/(NFPA) T 3.5.14 R1-1997
液力传动.直接控制阀门.分界特性的测定方法
(Hydraulic Fluid Power - Directional Control Valve - Method for Determining the Metering Characteristics)
ANSI/(NFPA) T 3.21.8-1990
气压液动.反应时间的测量.直接控制阀门
(Pneumatic Fluid Power - Measurement of Response Time - Directional Control Valves)
ANSI/ISA S 75.15-1993
对焊端球状控制阀的面对面尺寸(ANSI等级150、300、600、900、1500、2500)
(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500))
ANSI/FCI 91-1-1997
控制阀门密封的质量标准
(Standard for Qualification of Control Valve Stem Seals)
ANSI/UL 753-1996
消防装置用自动供水控制阀的警报附件
(Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service)
BS EN 60534-2-5-2003
工业过程控制阀.流通能力.通过有段间恢复功能的多段控制阀的流体流量的校准公式
(Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery)
ASTM F 1985-1999
气力操作的球形控制阀标准规范
(Standard Specification for Pneumatic-Operated, Globe-Syle, Control Valves)
BS EN 60534-3-2-2001
工业过程控制阀.尺寸.蝶形阀除外的转式控制阀的端面距
(Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves)
BS ISO 15407-2-2003
气压传动.五气口方向控制阀,规格18mm和26mm.有任选电接头的安装接口
(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector)
BS ISO 12238-2001
气压液动.方向控制阀门.转换时间的测量
(Pneumatic fluid power - Directional control valves - Measurement of shifting time)
BS ISO 5599-1-2001
气压液动.五通方向控制阀.不带电连接器的安装接口表面
(Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector)
BS ISO 5599-2-2001
气压液动.五通方向控制阀.任选电气连接器的安装接口面
(Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector)
BS EN 60534-6-2-2001
工业过程控制阀.定位器装到控制阀的安装细则.旋转传动装置上安装的定位器
(Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators)
BS EN 1074-5-2001
供水阀门.适用性和专用要求的试验.控制阀门
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves)
BS EN 60534-8-3-2000
工业流程控制阀.噪声问题.控制阀的空气动力噪声预报法
(Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method)
BS EN 60534-2-3-1998
工业过程控制阀.流量.试验程序
(Industrial-process control valves - Flow capacity - Test procedures)
BS EN 60534-8-1-2001
工业过程控制阀.噪声问题.通过控制阀的动力噪声的实验室测量
(Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves)
BS EN 60534-3-1-2000
工业过程控制阀.尺寸.带法兰的两路、球型、直立式控制阀门的面对面尺寸和带法兰的两路、球型、角度控制阀门
(Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle patter)
BS EN 1349-2000
工业处理控制阀门
(Industrial process control valves)
BS ISO 15407-1-2000
18mm和26mm五气口气动方向控制阀.无电插头的安装界面
(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector)
BS ISO 11727-1999
气动流体力学.控制阀和其它元件的控制机械装置和气门的识别
(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components)
BS EN 60534-3-3-1998
工业过程控制阀.尺寸.对接焊接,两向,球型,垂直模式控制阀的末端对末端尺寸
(Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves)
BS EN 60534-2-1-1999
工业过程控制阀 .流容.安装条件下液流规模方程
(Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions)
BS ISO 6263-1997
液压传动.补偿式流量控制阀.装配面
(Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces)
BS ISO 10770-2-1998
液压传动.电模式液压控制阀.第2部分:三向流动控制阀的试验方法
(Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves)
BS ISO 10770-1-1998
液压传动.电模式液压控制阀.第1部分:四向流动控制阀的试验方法
(Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves)
BS EN 60534-6-1-1998
工业过程控制阀 .控制阀调节器连接用安装元件.直线传动装置上调节器的安装
(Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators)
BS ISO 7790-1998
液压传动.规格为03和05型的四油口标准设计叠阀和四油口定向控制阀.紧固尺寸
(Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions)
EN 60534-8-1-2000
工业过程控制阀 第8部分：噪声的考虑 第1节：气动流流径控制阀产生的噪声的实验室测量
Industrial-process control valves - Part 8: Noise consideration; Section 1: Laboratory measurement of noise generated by hydrodynamic aerodynamic flow through control valves (IEC 60534-8-1:1986)
EN 60534-8-4-1994
工业过程控制阀 第8部分：噪声问题 第4节：流动产生的噪声的预测
Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994)
EN 60534-8-3-2000
工业流程控制阀 .第8-3部分 噪声问题 通过控制阀的动力噪声预测法
Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000)
EN 1074-5-2001
供水阀门 目的要求的适应性和合适的认证试验 第5部分：控制阀门
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves
EN 60534-3-1-2000
工业过程控制阀 第3－1部分：尺寸 法兰双通球形直型控制阀的端面间距尺寸和有法兰双通球型角型控制阀的
Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000)
EN 60534-2-1-1998
工业过程控制阀 第2－1部分：流通能力 安装条件下流体流量的校准公式
Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998)
EN 60534-1-1993
工业过程控制阀 第1部分 控制阀术语和一般考虑
Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987)
EN 60534-3-2-2001
工业过程控制阀 第3部分：尺寸 第2节：无法兰控制阀（薄型蝶阀除外）的端面间距尺寸
Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001)
EN 60534-3-3-1998
工业过程控制阀 第三部分：尺寸 对接焊接 两向 球型 垂直模式控制阀的末端对末端尺寸
Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998)
EN 60534-6-1-1997
工业过程控制阀 第6－1部分：定位器联到控制阀执行机构的安装细则 第1节：直线传动装置上调节器的安装
Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators (IEC 60534-6-1:1997)
EN 60534-6-2-2001
工业过程控制阀 第6－2部分：定位器联到控制阀执行机构的安装细则 环形执行机构定位器
Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators (IEC 60534-6-2:2000)
EN 60534-8-2-1993
工业过程控制阀 第8部分 噪声考虑 第2节通过控制阀的流体产生的噪声的实验室测量报法
Industrial-process control valves- Part 8: noise consideration- Section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991)
EN 60534-2-3-1998
工业过程控制阀 第2部分：流通能力 第3节：试验规程
Industrial-process control valves - Part 2-3: Flow capacity - Test procedures (IEC 60534-2-3:1997)
prEN 13959-2000
公称压力在DN6至DN250（含DN250）的防污染控制阀 E族A、B、C和D型
Anti-pollution check valves DN 6 to DN 250 inclusive - Family E, type A, B, C and D
prEN 60534-4-1998
工业过程控制阀 第4部分：检验和常规试验 草案
IEC 60534-4: Industrial-process control valves - Part 4: Inspection and routine testing
EN 1349-2000+AC-2001
工业加工控制阀门
Industrial process control valves
EN 60534-2-5-2003
工业加工控制阀 第2-5部分：流量 通过带级间恢复多级控制阀的流体尺寸方程
Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC 60534-2-5:2003) / Note: Endorsement notice
BS ISO 4401-1996
液压传动.四油口定向控制阀.装配面
(Hydraulic fluid power - Four-port directional control valves - Mounting surfaces)
BS EN 60534-1-1989
工业过程控制阀 .第1部分:控制阀术语和一般考虑
(Industrial-process control valves - Industrial-process control valves - Control valve terminology and general considerations)
BS EN 60534-8-4-1994
工业过程控制阀.第8部分:噪声问题.第4节.流动产生的噪声的预报
(Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow)
BS EN 60534-8-2-1991
工业过程控制阀.第8部分:噪声考虑.第2节:通过控制阀的流体产生的噪声的实验室测量
(Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves)
BS 6494-4-1989
液压阀的安装面.第4部分:03和05规格的四孔组件排气阀、模数组阀和方向控制阀夹紧尺寸规范
(Hydraulic fluid power valve mounting surfaces - Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves)
BS 5793-4-1987
工业过程控制阀.第4部分:检验和例行试验规范
(Industrial-process control valves - Specification for inspection and routine testing)
BS 5944-4-1984
液压动力系统和部件所产生的空气噪音的测量.第4部分:流量和压力控制阀声功率级的测定方法
(Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure)
BS 5793-5-1984
工业过程控制阀.第5部分:标记规范
(Industrial-process control valves - Specification for marking)
BS 1655-1950
过程控制工业用法兰连接自动控制阀(面至面尺寸)规范
(Specification for flanged automatic control valves for the process control industry (face-to-face dimensions))
DIN EN 60534-2-3-1998
工业过程控制阀.第2-3部分:流量.检验方法
(Industrial-process control valves - Part 2-3: Flow capacity; test procedures (IEC 60534-2-3:1997); German version EN 60534-2-3:1998)
DIN EN 60534-6-1-1998
工业流程控制阀.第6部分:调节阀门驱动的位置调节器固定用
机油滤清器一边要知道机油泵出来的油需要过滤会才可计算处最高压力，现在的车都是测高压的有的也有测试低压的具体车型可以看维修手册了，
(1)Fs=(p1-p2)*π*（d1/2）^2
(2)L=Fs/K
GB/T13852-1992
船用液压控制阀技术条件
General specification of hydraulic control valves for ship
GB/T17490-1998
液压控制阀油口、底板、控制装置和电磁铁的标识
Hydraulic fluid power--Identification of valve ports,subplates,control devices and solenoids
GB/T15623.1-2003
液压传动 电调制液压控制阀 第1部分：四通方向流量控制阀试验方法
Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 1:Test methods for four-way directional flow control valves
GB/T15623.2-2003
液压传动 电调制液压控制阀 第2部分：三通方向流量控制阀试验方法
Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 2:Test methods for three-way directional flow control valves
GB/T17213.7-1998
工业过程控制阀第7部分: 控制阀数据单
Industrial-process control valves Part 7: Control valve data sheet
GB/T17213.8-1998
工业过程控制阀第8部分: 噪声的考虑第1节: 实验室内测量空气动力流流径控制阀产生的噪声
Industrial-process control valves Part 8: Noise considerations Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves
GB/T17213.1-1998
工业过程控制阀第1部分: 控制阀术语和总则
Industrial--Process control valves Part 1: Control valve terminology and general considerations
GB/T17213.5-1998
工业过程控制阀第5部分: 标志
Industrial-process control valves Part 5: Marking
GB/T2514-1993
四油口板式液压方向控制阀安装面
Hydraulic fluid power--Four-port directional control valves--Mounting surfaces
GB/T8104-1987
流量控制阀试验方法
Hydraulic fluid power--Valves--Testing method of flow control valves
GB/T7940.3-2001
气动五气口方向控制阀第三部分: 功能识别编码体系
Pneumatic fluid power--Five-port directional control valves--Part 3: Code system for communication of valve functions
GB/T8106-1987
方向控制阀试验方法
Hydraulic fluid power--Valves--Testing method of directional control valves
GB/T7940.2-2001
气动五气口方向控制阀第二部分带电气接头的安装面
Pneumatic fluid power--Five-port directional control valves--Part 2: Mounting interface surfaces with optional elettrical connector
GB/T8105-1987
压力控制阀试验方法
Hydraulic fluid power--Valves--Testing method of pressure control valves
GB/T7940.1-2001
气动五气口方向控制阀第一部分: 不带电气接头的安装面
Pneumatic fluid power--Five-port directional control valves--Part 1: Mounting interface surfaces without electrical connector
GB/T8100-1987
板式联接液压压力控制阀(不包括溢流阀)顺序阀、卸荷阀、节流阀和单向阀安装面
Hydraulic fluid power--Pressure control valves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves--Mounting surfaces
GB/T8098-2003
液压传动带补偿的流量控制阀安装面
Hydraulic fluid power--Compensated flow control valves--Mounting surfaces
JB/T7387-1994(2005复审)
工业过程控制系统用电动控制阀
NF C46-520-1993
工业过程控制阀.第8部分:噪声问题.第2节:通过控制阀的液压流动产生的噪声的实验室测量
(Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.)
NF C46-522-1994
工业处理控制阀.第8部分:噪声条款.第4节:液压流动产生的噪声预定(EN 534-8-4)
(Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.)
NF E49-080-1-2002
气压液动.五通定向控制阀.第1部分:不带电连接器的安装接口
(Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.)
NF E49-080-2-2002
气压液动.五通方向控制阀.第2部分:任选电气连接器的安装接口面
(Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.)
NF C46-505-1998
绝缘过程控制阀.第2-3部分:流量容量.试验过程
(Industrial-process control valves. Part 2-3 : flow capacity. Test procedures.)
NF C46-630-1998
工业过程控制阀.第6部分:控制阀与定位器连接用安装细节.第1节:线性传动装置上安装的定位器
(Industrial-process control valves. Part 6 : mounting details for attachment of positioners to control valves. Section 1 : positioner mounting on linear actuators.)
NF E29-453-2000
工业过程控制阀门
(Industrial process control valves.)
NF E29-316-5-2001
供水用阀门.适用性要求和专用检查试验.第5部分:控制阀门
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves.)
NF C46-521-2001
工业过程控制阀.第8部分:噪声问题.第3节:气动控制阀噪声预测法
(Industrial-process control valves - Part 8-3 : noise considerations - Control valves aerodynamic noise prediction method.)
NF E48-435-1998
液压传动.尺寸02、03和05的四端口模式排气阀和四端口方向控制阀.夹紧尺寸
(Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions.)
NF C46-519-2001
工业过程控制阀.第8部分:噪声考虑.第1节:实验室测量气动流经控制阀产生的噪声
(Industrial-process control valves - Part 8 : noise considerations - Section 1 : laboratory measurement of noise generated by aerodynamic flow through control valves.)
NF C46-531-2001
工业过程控制阀.第6-2部分:定位器装到控制阀的安装细则.旋转传动装置上安装的定位器
(Industrial-process control valves - Part 6-2 : mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators.)
NF E49-091-2002
气压传动.控制阀和其它部件的孔口和控制机械的验证
(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components.)
XP E29-140-1999
使用气体燃料的家用装置的控制阀.安全控制阀(带有集中自动密闭器的)
(Control cocks for household appliances using gaseous fuels - Safety cocks (with integrated automatic obturator).)
NF C46-510-2001
工业过程控制阀.第3-1部分:尺寸.双通球型直立式控制法兰阀门的面对面尺寸和双通球型角度控制法兰阀门的中心
(Industrial-process control valves - Part 3-1 : dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, a)
NF C46-511-2001
工业过程控制阀.第3-2部分:尺寸.蝶阀除外的旋转控制阀门的面对面尺寸
(Industrial-process control valves - Part 3-2 : dimensions - Face-to-face dimensions for rotary control valves except butterfly valves.)
NF E49-090-2-2003
气压传动.18mm和26mm五气口方向控制阀.第2部分:带光学电接头的安装面
(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2 : mounting interfaces with optional electrical connector.)
NF C46-512-1999
工业处理控制阀.第3-3部分:尺寸.对焊接的头尾相接尺寸.两接头球型直接式控制阀(欧洲标准EN 60534-3-3)
(Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.)
ANSI/IEEE 1290-1996
核发电站电动控制阀门马达应用、防护、控制和试验指南
(Guide for MOV (Motor-Operated Valve) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations)
ANSI/FCI 87-2-1990
弹簧模板驱动控制阀动力信号标准
(Power Signal Standard for Spring-Diaphragm Actuated Control Valves)
ANSI/ISA 75.08.02-2003
无凸缘的控制阀端面间的尺寸(级别150、300和600)
(Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600) )
ANSI/ISA S 75.08.03-2001
承插焊接端头和螺旋端头球状控制阀的面到面尺寸
(Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500))
ANSI/ISA 75.08.06-2002
带凸缘的球型控制阀体的面对面尺寸(类型900、1500和2500)
(Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) )
ANSI/ISA 75.08.05-2002
端头对焊球型控制阀的面对面尺寸(类型150、300、600、900、1500和2500)
(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) )
ANSI/ISA 75.01.01-2002
尺寸控制阀用流量方程式
(Flow Equations for Sizing Control Valves )
ANSI/ISA 75.08.01-2002
整体式带凸缘的球型控制阀体的面对面尺寸(类型125、150、250、300和600)
(Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) )
ANSI/ISA S 75.19.01-2001
控制阀的静水试验
(Hydrostatic Testing of Control Valves)
ANSI/ISA S 75.08.04-2001
对焊端头球状控制阀的面到面尺寸
(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves)
ANSI/ISA S 75.08.07-2001
独立法兰球状控制阀的面到面尺寸
(Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600))
ANSI/(NFPA) T 3.5.14 R1-1997
液力传动.直接控制阀门.分界特性的测定方法
(Hydraulic Fluid Power - Directional Control Valve - Method for Determining the Metering Characteristics)
ANSI/(NFPA) T 3.21.8-1990
气压液动.反应时间的测量.直接控制阀门
(Pneumatic Fluid Power - Measurement of Response Time - Directional Control Valves)
ANSI/ISA S 75.15-1993
对焊端球状控制阀的面对面尺寸(ANSI等级150、300、600、900、1500、2500)
(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500))
ANSI/FCI 91-1-1997
控制阀门密封的质量标准
(Standard for Qualification of Control Valve Stem Seals)
ANSI/UL 753-1996
消防装置用自动供水控制阀的警报附件
(Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service)
BS EN 60534-2-5-2003
工业过程控制阀.流通能力.通过有段间恢复功能的多段控制阀的流体流量的校准公式
(Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery)
ASTM F 1985-1999
气力操作的球形控制阀标准规范
(Standard Specification for Pneumatic-Operated, Globe-Syle, Control Valves)
BS EN 60534-3-2-2001
工业过程控制阀.尺寸.蝶形阀除外的转式控制阀的端面距
(Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves)
BS ISO 15407-2-2003
气压传动.五气口方向控制阀,规格18mm和26mm.有任选电接头的安装接口
(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector)
BS ISO 12238-2001
气压液动.方向控制阀门.转换时间的测量
(Pneumatic fluid power - Directional control valves - Measurement of shifting time)
BS ISO 5599-1-2001
气压液动.五通方向控制阀.不带电连接器的安装接口表面
(Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector)
BS ISO 5599-2-2001
气压液动.五通方向控制阀.任选电气连接器的安装接口面
(Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector)
BS EN 60534-6-2-2001
工业过程控制阀.定位器装到控制阀的安装细则.旋转传动装置上安装的定位器
(Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators)
BS EN 1074-5-2001
供水阀门.适用性和专用要求的试验.控制阀门
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves)
BS EN 60534-8-3-2000
工业流程控制阀.噪声问题.控制阀的空气动力噪声预报法
(Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method)
BS EN 60534-2-3-1998
工业过程控制阀.流量.试验程序
(Industrial-process control valves - Flow capacity - Test procedures)
BS EN 60534-8-1-2001
工业过程控制阀.噪声问题.通过控制阀的动力噪声的实验室测量
(Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves)
BS EN 60534-3-1-2000
工业过程控制阀.尺寸.带法兰的两路、球型、直立式控制阀门的面对面尺寸和带法兰的两路、球型、角度控制阀门
(Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle patter)
BS EN 1349-2000
工业处理控制阀门
(Industrial process control valves)
BS ISO 15407-1-2000
18mm和26mm五气口气动方向控制阀.无电插头的安装界面
(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector)
BS ISO 11727-1999
气动流体力学.控制阀和其它元件的控制机械装置和气门的识别
(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components)
BS EN 60534-3-3-1998
工业过程控制阀.尺寸.对接焊接,两向,球型,垂直模式控制阀的末端对末端尺寸
(Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves)
BS EN 60534-2-1-1999
工业过程控制阀 .流容.安装条件下液流规模方程
(Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions)
BS ISO 6263-1997
液压传动.补偿式流量控制阀.装配面
(Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces)
BS ISO 10770-2-1998
液压传动.电模式液压控制阀.第2部分:三向流动控制阀的试验方法
(Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves)
BS ISO 10770-1-1998
液压传动.电模式液压控制阀.第1部分:四向流动控制阀的试验方法
(Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves)
BS EN 60534-6-1-1998
工业过程控制阀 .控制阀调节器连接用安装元件.直线传动装置上调节器的安装
(Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators)
BS ISO 7790-1998
液压传动.规格为03和05型的四油口标准设计叠阀和四油口定向控制阀.紧固尺寸
(Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions)
EN 60534-8-1-2000
工业过程控制阀 第8部分：噪声的考虑 第1节：气动流流径控制阀产生的噪声的实验室测量
Industrial-process control valves - Part 8: Noise consideration; Section 1: Laboratory measurement of noise generated by hydrodynamic aerodynamic flow through control valves (IEC 60534-8-1:1986)
EN 60534-8-4-1994
工业过程控制阀 第8部分：噪声问题 第4节：流动产生的噪声的预测
Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994)
EN 60534-8-3-2000
工业流程控制阀 .第8-3部分 噪声问题 通过控制阀的动力噪声预测法
Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000)
EN 1074-5-2001
供水阀门 目的要求的适应性和合适的认证试验 第5部分：控制阀门
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves
EN 60534-3-1-2000
工业过程控制阀 第3－1部分：尺寸 法兰双通球形直型控制阀的端面间距尺寸和有法兰双通球型角型控制阀的
Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000)
EN 60534-2-1-1998
工业过程控制阀 第2－1部分：流通能力 安装条件下流体流量的校准公式
Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998)
EN 60534-1-1993
工业过程控制阀 第1部分 控制阀术语和一般考虑
Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987)
EN 60534-3-2-2001
工业过程控制阀 第3部分：尺寸 第2节：无法兰控制阀（薄型蝶阀除外）的端面间距尺寸
Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001)
EN 60534-3-3-1998
工业过程控制阀 第三部分：尺寸 对接焊接 两向 球型 垂直模式控制阀的末端对末端尺寸
Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998)
EN 60534-6-1-1997
工业过程控制阀 第6－1部分：定位器联到控制阀执行机构的安装细则 第1节：直线传动装置上调节器的安装
Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators (IEC 60534-6-1:1997)
EN 60534-6-2-2001
工业过程控制阀 第6－2部分：定位器联到控制阀执行机构的安装细则 环形执行机构定位器
Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators (IEC 60534-6-2:2000)
EN 60534-8-2-1993
工业过程控制阀 第8部分 噪声考虑 第2节通过控制阀的流体产生的噪声的实验室测量报法
Industrial-process control valves- Part 8: noise consideration- Section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991)
EN 60534-2-3-1998
工业过程控制阀 第2部分：流通能力 第3节：试验规程
Industrial-process control valves - Part 2-3: Flow capacity - Test procedures (IEC 60534-2-3:1997)
prEN 13959-2000
公称压力在DN6至DN250（含DN250）的防污染控制阀 E族A、B、C和D型
Anti-pollution check valves DN 6 to DN 250 inclusive - Family E, type A, B, C and D
prEN 60534-4-1998
工业过程控制阀 第4部分：检验和常规试验 草案
IEC 60534-4: Industrial-process control valves - Part 4: Inspection and routine testing
EN 1349-2000+AC-2001
工业加工控制阀门
Industrial process control valves
EN 60534-2-5-2003
工业加工控制阀 第2-5部分：流量 通过带级间恢复多级控制阀的流体尺寸方程
Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC 60534-2-5:2003) / Note: Endorsement notice
BS ISO 4401-1996
液压传动.四油口定向控制阀.装配面
(Hydraulic fluid power - Four-port directional control valves - Mounting surfaces)
BS EN 60534-1-1989
工业过程控制阀 .第1部分:控制阀术语和一般考虑
(Industrial-process control valves - Industrial-process control valves - Control valve terminology and general considerations)
BS EN 60534-8-4-1994
工业过程控制阀.第8部分:噪声问题.第4节.流动产生的噪声的预报
(Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow)
BS EN 60534-8-2-1991
工业过程控制阀.第8部分:噪声考虑.第2节:通过控制阀的流体产生的噪声的实验室测量
(Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves)
BS 6494-4-1989
液压阀的安装面.第4部分:03和05规格的四孔组件排气阀、模数组阀和方向控制阀夹紧尺寸规范
(Hydraulic fluid power valve mounting surfaces - Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves)
BS 5793-4-1987
工业过程控制阀.第4部分:检验和例行试验规范
(Industrial-process control valves - Specification for inspection and routine testing)
BS 5944-4-1984
液压动力系统和部件所产生的空气噪音的测量.第4部分:流量和压力控制阀声功率级的测定方法
(Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure)
BS 5793-5-1984
工业过程控制阀.第5部分:标记规范
(Industrial-process control valves - Specification for marking)
BS 1655-1950
过程控制工业用法兰连接自动控制阀(面至面尺寸)规范
(Specification for flanged automatic control valves for the process control industry (face-to-face dimensions))
DIN EN 60534-2-3-1998
工业过程控制阀.第2-3部分:流量.检验方法
(Industrial-process control valves - Part 2-3: Flow capacity; test procedures (IEC 60534-2-3:1997); German version EN 60534-2-3:1998)
DIN EN 60534-6-1-1998
工业流程控制阀.第6部分:调节阀门驱动的位置调节器固定用
谁有机械制图第五版(大连理工大学)中安全阀的装配图cad文件!谢谢!
答：额 做了 solidworks 的图 ，不知可行、？
这是什么油泵 我需要画它的装配图
答：一个装在油泵外接管道上的”四通”，四通的液压胀形是通过金属材料的轴向补偿胀出支管的一种成形工艺。其过程是采用专用液压机，将与四通 焊接四通 直径相等的管坯内注入液体，通过液压机的两个水平侧缸同步对中运动挤压管坯，管坯受挤压后体积变小，管坯内的液体随管坯体积变小而压力升高，当达到四通...
我想做一个通过网络和电脑控制阀门启闭的模块还有执行器,有没有能...
答：执行器一般分为模拟量控制、开关量控制、总线控制。不知道你考虑的成本多少。基本思路是做一组态，通过电脑和执行器控制模块通信，就可以实现控制。
泵车S管阀眼镜板切割环怎么安装与及详细装配图纸
答：图纸没有，那是内部资料。换S管要先把筛网、搅拌轴（叶片）拆掉，然后拆大小端轴承座，就可以把S管从料斗里吊出来了。切割环是最简单的了，把后面的大螺母松到只有一两个丝，然后把大端往外顶，顶到切割环可以拿出来就行了。眼睛板跟切割环的方法差不多，只是料斗后面多了六个螺丝。眼镜板是又叫...
调节阀装配图能否看出行程值
答：一般看不出
2、 在设计装配图的时候是不是将所有的零部件都一一用3维画出来。包括...
答：装配图要求表达清楚所有要安装零件的位置，数量信息。简单的可用二维，必要时多个视图表达。如果老师要求是三维的话，那就要所有零件都用三维画出，三维装配，最后再生成二维图
储罐的装配图如何画
答：9、装配图和主要零部件图 卧式储罐装配图（ A1 ） 一张 鞍座（ A3） 一张 五、设计注意事项 1、因为本储罐设计属于机械设计，所以不需要进行工艺计算，只是确定其筒体直径及长度。2、注意法兰选型必须根据设计压力对照法兰标准进行选用。六、设计说明书要求 1 、字数不少于 3500 以上字数。2 、内容...
关于液压系统的计算问题!~高手请进!~
答：54.液压控制阀的理论研究与设计说明书.doc(29页)A0溢流阀装配图.dwgA1溢流阀先导阀体.dwgA1溢流阀主阀体.dwgA1溢流阀主阀芯.dwgA4溢流阀调节杆.dwgA4溢流阀调压螺帽.dwgA4溢流阀先导阀芯.dwgA4溢流阀先导阀座.dwgA4溢流阀主阀座.dwg55.运送铝活塞铸造毛坯机械手设计说明书.doc(26页)答辩演示幻灯片.ppt实体....
什么是机电一体化?
答：机电一体化又称机械电子学，英语称为Mechatronics，机电一体化成为一门综合计算机与信息技术、自动控制技术、传感检测技术、伺服传动技术和机械技术等交叉的系统技术，并综合应用到实际中去的综合技术。是现代化的自动生产设备几乎可以说都是机电一体化的设备。（1） 机械技术 机械技术是机电一体化的基础，机械...
什么叫转子发动机
答：转子发动机可以看成是按照层来装配的，我们大致可以把它分成5个主要的层。冷却液在所有这些部件的流道中流动。点击查看FLASH 点击FLASH中的OPEN可以看到各个部件的立体装配图 最外的两端包含着密封圈和输出轴轴承，和装着转子的缸体间也是保持密封的。这些部件的内表非常光滑，以保证密封工作良好。每块上有...
